Questions LLC
Login
or
Sign Up
Ask a New Question
Science
Physics
Density
A brick of silver with a mass of 31.5 kg measures 0.150 m long, 42.0 cm wide, and 72.00 mm thick. Calculate density of silver in grams per cubic centimeter?
1 answer
Read your posts. This is double duty. I've answered this just below.
You can
ask a new question
or
answer this question
.
Similar Questions
A brick of silver with a mass of 31.5 kg measures 0.150 m long, 42.0 cm wide, and 72.00 mm thick. What is density of silver in
Top answer:
I would change all of the dimensions to cm, then volume = length x width x thickness = volume in cc.
Read more.
A rectangular brick measures 6cm by 9cm by 20cm and has a mass of 2.563 kilograms. What is the density of the brick in grams per
Top answer:
1 kgm = 1000gm density = mass/volume density = (2.563 * 1000)/(6 * 9 * 20) = ?
Read more.
Two bricks having a 22N force applied on them and each brick having a friction of 1N ,the first brick with the mass of 2kg and
Top answer:
To calculate the acceleration experienced by the first brick, we can use Newton's second law of
Read more.
How long would it take in minutes to plate 1.00 gram of silver to a watch when 9.2 amps are passed through a silver (I) chloride
Top answer:
Okay, so I did that and I got 97.225 secs or 1.62 minutes
Read more.
Find the heat that flows in 1 s through a lead brick 18 cm long if the temperature difference between the ends of the brick is
Top answer:
To find the heat that flows through the lead brick, we can use the formula for heat transfer known
Read more.
I figured out the NO3- which is 0.13, I'm stuck on the Cl- I have 0.24*2-0.0416= 0.4384 but I'm being told that's wrong
What mass
Top answer:
AgNO3 + CaCl2 ==> Ca(NO3)2 + 2AgCl You have 0.26M*160 mL = 41.6 millimols Ag^+. You have 0.24M x 150
Read more.
in trial one the mass of silver oxide is .5g. The mass of silver metal product is .431 grams.
In trial two the silver oxide=.498
Top answer:
To calculate the mass of oxygen that combined with the silver, we can use the conservation of mass
Read more.
A brick that weighs 23 kg is laying on a table. The brick is retained. From the brick, a thread is connected via a castor to a
Top answer:
weight of brick = m g = 23 * 9.81=226 N friction resistance maximum = 226*.17= 38.4 N on brick: T -
Read more.
A brick becomes dislodged from the top of a state building (at a height of 1290 feet) and falls to the sidewalk below.
(a) Write
Top answer:
(a) s = 1290 - 16t^2 ... for v,a (b) solve for t: 1290 - 16t^2 = 0 (c) plug that t into v(t)
Read more.
A brick with a mass of 6kg is dropped vertically from a certain height.it takes 4,5 seconds for the brick to reach the
Top answer:
h = 0.5g*t^2 = 4.9*4.5^2 = 99.23 m. PE = mg*h = 6*9.8 * 99.23 = 5834 J.
Read more.
Related Questions
One method for reclaiming silver metal from silver chloride results in a 94.6%
yield. Calculate the actual mass of silver that
Calculate the mass of silver deposited when 0.2A of electricity is passed through a silver chloride solution for 2 hours, given
A brick of salt has a volume of 50cm3 and a mass of 100 grams. Calculate the
density of the brick.
A silver-copper alloy had a mass of 0.1264g. When the alloy was dissolved in nitric acid and the silver precipitated as silver
Silver chloride, often used in silver plating, contains 75.27% Ag. Calculate the mass of silver chloride in grams required to
You plan to construct a brick wall measuring 4.5 m in length, 1.2 m high, and 0.5 m in width. If a brick measures 20 cm x 9 cm x
Calculate the mass of silver deposited when 0.2A of electricity is passed through a silver chloride solution of 2 hours . Given
A brick mason is on a steep roof repairing a chimney and drops a brick. If the brick slides down the roof and leaves the edge of
a) A current of 1.50 Amperes passes through a solution of AgNO3 for 3.0 hours. What mass, in grams, of silver collects on the
What is the mass (in kilograms) of a cube of silver that measures 0.26m on each side