Questions LLC
Login
or
Sign Up
Ask a New Question
Physics
Mechanics
Work and Energy
how long would it take a 4.50kW MOTOR TO RAISE A 175KG BOILER TO A PLATFORM 15.0M ABOVE THE FLOOR?
1 answer
Please don't post any more of these unless you go back and add YOUR THOUGHTS about each one. What have YOU DONE so far in trying to solve them?
You can
ask a new question
or
answer this question
.
Similar Questions
How long would it take a 4.50-kW motor to raise a 175-kg boiler to a platform 15.0 m
above the floor? Is this correct?
Top answer:
F = m*g = 175 * 9.8 = 1715 N. = Force of the boiler. Work = F*d = 1715 * 15 = 25,725 J. 4.5kw = 4500
Read more.
How many seconds would it take a 7.00hp motor to raise a 475 lb boiler to a platform 38.0 ft high?
Top answer:
Power = 7.0hp * 746W/hp = 5222 Watts = 5222 Joules/s. Mass = 475Lbs * 0.454kg/Lb = 215.65 kg.= Mass
Read more.
A steam boiler is made of steel and weighs 900lb. The boiler contains 400lb of water. How many Btu are required to raise the
Top answer:
To find the amount of heat required to raise the temperature of the steel and water in the steam
Read more.
A motor outputs power of 500 watts and is used to raise a 5kg mass vertically at
constant speed. How long in seconds does it take
Top answer:
PE=mgh 5*9.8*15= 735 Power= Energy/time so.. t=E/P t=735/500 t=1.47
Read more.
A 59-kg housepainter stands on a 16-kg aluminum platform. The platform is attached to a rope that passes through an overhead
Top answer:
This helped so much
Read more.
A 100 kg steam boiler is made of steel and contains 200 kg of water at 5.00°C. How much heat is required to raise the
Top answer:
1 Cal = 4180 J. Q = ΔU1 + ΔU2 = =c1•m1 •ΔT + c2•m2 •ΔT = = ΔT •(c1•m1 + c2•m2 ) =
Read more.
A 1.2 kg cannon ball is shot off a platform (1) at 10 m/s. It hits a platform (2) and begins to roll without bouncing. The
Top answer:
You need a figure to show what is going on. It should show the difference in platform heights and
Read more.
A man is standing on a platform that is connected to a pulley arrangement, as the drawing shows. By pulling upward on the rope
Top answer:
the first thing you always want to do is drawing a free body diagram, you see that there is only 2
Read more.
A man is standing on a platform that is connected to a pulley arrangement, as the drawing shows. By pulling upward on the rope
Top answer:
my guess would be using F=m.a and inputing the values you have in. f = 94.7kg / 1.20m/s2 = 78.92n
Read more.
A man is standing on a platform that is connected to a pulley arrangement, as the drawing shows. By pulling upward on the rope
Top answer:
To find the pulling force the man should apply, we can use Newton's second law of motion which
Read more.
Related Questions
Miss E. deWater, the former platform diver of the Ringling Brothers' Circus, dives from a 20 meter high platform into a shallow
A production crew is assembling a three-level platform inside a stadium for a performance. The platform has the dimensions of 4x
The platform of the Taj Mahal in India is a rectangular prism. It is 95 m long, 95 m wide, and 7 m high. Find the surface area
two people carry a heavy electric motor by placing it on a light board 2m long.one person lifts at one end with a force of 700N,
A motor is rated to deliver 10.0kW. At what speed can this motor raise a mass of 2.75x10^4kg?
The angular velocity of a process control motor is (21−12t2) rad/s, where t is in seconds.
A)At what time does the motor
A ball rolls horizontally with a speed of 7.6 m/s off the edge of a tall platform. If the ball lands 8.7 m from the point on the
A platform was originally designed as a rectangle 12.00 meters long and 8.00 meters wide. The rectangular design is replaced
Two construction workers each of mass m raise themselves on a hanging platform using pulleys as shown above. If the platform has
A 10kilow walts electric motor is used to raise a 400kg load of bricks to a height of 60meters.The efficiency of the motor