Questions LLC
Login
or
Sign Up
Ask a New Question
Questions
Science
The driving pulley of a motorbike rotates at 3 r/s and has a diameter of 300mm. The pulley exerts an effective force of 2000N at a point on its periphery. Calculate the turning moment and the power in Kw .
1 answer
300 N.m
You can
ask a new question
or
answer this question
.
Similar Questions
The driving pulley of a motorbike rotates at 3r/s and has a diameter of 300 mm. The pulley exerts an effective force of 2000n at
Top answer:
I don't mind helping to find answers, but I resent having to provide the questions as well.
Read more.
A belt conveyor must transmit 135 kW of power. The driving pulley has a diameter of 500 mm, and rotates at 75 r/min. Assume that
Top answer:
First, we need to calculate the tension in the belt using the power transmitted and the speed of the
Read more.
the tension ratio between the tight and slack side is 4,2:1. the force in the slack side of the belt is 500N. the diameter of
Top answer:
To calculate the tension in the tight side of the belt, we'll use the tension ratio and the force in
Read more.
Two pullies are connected by a belt, Pulley A has a radius of 3 cm and pulley B has a radius of 6cm. As Pulley A rotates, a drop
Top answer:
got to know how high the pulley axles are. Also, where on the circumference of B is the drop of
Read more.
I left out the following sentences. Thank you very much.
1)I like wearing casual clothes, such as T-shirts, jeans and sneakers.
Top answer:
1. I like wearing casual clothes, such as T-shirts, jeans, and sneakers. This year I got my
Read more.
four pulleys are connected by two belts. Pulley A (radius 15cm) is the drive pulley and it rotates at 10 rad/s. Pulley B (radius
Top answer:
To solve this problem, we will work step by step using the information given and the principles of
Read more.
two pulley rotate at 150 rpm and 300 rpm. the diameter of the larger pulley 15cm if the pulley are connected by belt . what is
Top answer:
Since the distance covered by the belt depends on the circumference of the circles , ...
Read more.
The radius of a pulley is 202 mm. Find the circumference of the pulley. (This is the amount of rope that passes through the
Top answer:
NO Don't know how the bot does basic arithmetic, but I get ... C = 2π (202) = 1269.2 mm
Read more.
A vacuum pump is connected to its electric motor by a belt drive (Fig. 9-40, not to scale). The motor rotates at a rate of 1000
Top answer:
Diameter = 1000rev/min ÷ 60s * 2π * 2.9cm ÷ (2π * 31rev/s) Diameter = 1.56cm
Read more.
A pulley whose diameter is 9 inches is connected by a belt to another pulley whose diameter is 6 inches. If the larger pulley
Top answer:
Since 9*2 = 6*3, the big pully turns 2 times while the small pulley turns 3 times So, 3/2 * 1200 =
Read more.
Related Questions
the normal acceleration of a particle on the rim of a pulley 10 ft in diameter is constant @ 8000 ft/s^2. determine the speed of
Find the diameter of a pulley which is driven at 360 rpm by a belt moving at 40 ft/s.
Then in 1 s the pulley turns through an
The 2 pulleys in the figure have radii of 15 cm and 8 cm, respectively. The larger pulley rotates 25 times in 36 seconds find
1. Determine the effort required to lift a load of 100 N using:
(a) Using a single fixed pulley (b) A single movable pulley (c)
find the radius of a pulley if rotating the pulley 108.03 degrees raises the pulley 37.3mm
A pulley revolving at 200 revolutions per minute has a diameter of 15 inches. It is belted to a second pulley which revolves at
A simple pulley with the given
radius r used to lift heavy objects is positioned 10 feet above ground level. Given that the pully
A 3.00 kg stone is tied to a thin, light wire wrapped around the outer edge of the uniform 8.00 kg cylindrical pulley. The inner
A pulley with a diameter of 24 inches is driven by a belt which is moving 1045 ft/min. How many revolutions per minute are made
A star with the same mass and diameter as the sun rotates about a central axis with a period of about 29.2 days. Suppose that