Posted by **dmkp** on Saturday, February 9, 2013 at 12:08pm.

A cylindrical tank with flat endplates is constructed from two sections that are welded together circumferentially.The outer diameter of the tank is 1.20, and the wall of the tank is 20.0 mm thick and the mamimum internal pressure is 2.00 MPa.

(a) Calculate the maximum hoop stress in the tank

(b) Calculate the maximum tensile stress in the tank

(c) The tensile strength of the weld is 350 MPa and the shear strength of the weld is 40% of the tensile strength. what is the magnitude of the tensile stress that will cause the weld to burst open

## Answer this Question

## Related Questions

- mechanics of materials - A cylindrical tank with flat endplates is constructed ...
- mechanics of materials - A cylindrical tank with flat endplates is constructed ...
- mechanical properties of materials - A cylindrical tank with flat endplates is ...
- geometry - A cylindrical tank is being constructed to hold 10,000 ft^3 of water...
- Mechanics of Materials - the propane gas tank has an inner diameter of 1500mm ...
- math - If the outer diameter of a cylindrical oil tank is 54.28 inches and the ...
- Materials Science - A thin-wall cylindrical tank has radius R, wall thickness t...
- Physics - A 30m high cylindrical water tank has a diameter of 14m. The tank is ...
- Physics II - A large cylindrical water tank 11.5 m in diameter and 13.5 m tall ...
- strength of materials - a water tank is 10 m in diameter and 16m high. if the ...

More Related Questions