Questions LLC
Login
or
Sign Up
Ask a New Question
Engineering
Mechanics of Materials
Strength of Materials
A steel bar with a cross sectional area of 25cm2 is found to shear fracture when subjected to a tensile load of 400kN. calculate the limiting shear stress of the bar.
1 answer
τ=T/A=400000/25•10⁻⁴=1.6•10⁸ N/m²
You can
ask a new question
or
answer this question
.
Related Questions
A hydraulic lift in a garage has two pistons: a small one of cross-sectional area 3.70cm2 and a large one of cross-sectional
The drawing shows a 156-kg crate hanging from the end of a steel bar (S = 8.1 x 1010 N/m2). The length of the bar is 0.117 m,
The femur is a bone in the leg whose minium cross-sectional area is about 3.60 E-4 m2. A compressional force in excess of 6.90
The femur is a bone in the leg whose minimum cross-sectional area is about 3.60 10-4 m2. A compressional force in excess of 6.90
In constructing a large mobile, an artist hangs an aluminum sphere of mass 6.0kg from a vertical steel wire 0.50m long and 2.5
Water flows with a speed of 2.5 m/s through a section of hose with a cross-sectional area of 0.0084 m^2. Further along the hose
A gutter with trapezoidal cross-section is to be made from a long sheet of stainless steel that is 30 cm wide by turning up
Blood flows in an aorta of radius 4.12mm at 35.0cm/s. Calculate the volume flow rate.
Although the cross-sectional area of a
A steel cable of length 10 m and cross-sectional area 1200 mm2 is loaded with an object of weight 30 kN. Given that the cable is
A uniform bar 1.900 meters in length and having a cross sectional area of 11.000cm^2 is subject to a loading of 5450.000