Questions LLC
Login
or
Sign Up
Ask a New Question
Science
Physics
Exerting a force of 88 N on the circular piston of a syringe causes a pressure increase in the barrel of 1.3 atm. What is the diameter of the piston?
1 answer
1.3 atm =131722.5 Pa
p=F/A=4F/πd².
d=sqrt(4F/πp)=...
You can
ask a new question
or
answer this question
.
Similar Questions
Exerting a force of 94 N on the circular piston of a syringe causes a pressure increase in the barrel of 1.3 atm. What is the
Top answer:
P = 1.3 atm = 1.3*10^5 N/m^2 P = Force/Area = 94 N/A Solve for the area A, and use that to get the
Read more.
What is the pressure increase in the fluid in a syringe when a force of 34.5 N is applied to the circular piston of the syringe,
Top answer:
pressure=force/area
Read more.
A syringe with a movable piston, contains 0.057g of carbon dioxide gas at 23.5C. If the pressure in the syringe was 953mmHg,
Top answer:
Do you have any idea how large a volume 2.59 L is? Something like 2.5 quarts. moles = grams
Read more.
Read the activity 2-1:Force and Pressure in the lab manual (pages 167-168). As described in the manual, consider a 10 cc syringe
Top answer:
ok so. I solved first part with F/A i got .9239 kPa. second part i solved to i just added the
Read more.
Read the activity 2-1:Force and Pressure in the lab manual (pages 167-168). As described in the manual, consider a 10 cc syringe
Top answer:
I don't get the big picture of what is going on in your lab manual problem. That is why I have not
Read more.
Read the activity 2-1:Force and Pressure in the lab manual (pages 167-168). As described in the manual, consider a 10 cc syringe
Top answer:
To answer this question, we first need to understand the relationship between force and pressure in
Read more.
A cylinder contains one liter of air at room temperature (300 K) and atmospheric pressure (10^5 N/m^2). At one end of the
Top answer:
a) Well, pushing a piston sounds like a lot of work! So, the answer must be "A ton of work!" But in
Read more.
In a hydraulic piston set up, one circular piston has a diameter of 2 cm,while the other piston has a diameter of 6cm. Calculate
Top answer:
The force ratio is the area ratio, since both pistons experience the same pressure.
Read more.
The air in the syringe is at a pressure of 2.0×105Pa. The piston is slowly moved into the
syringe, keeping the temperature
Top answer:
P V = n R T n R and T do not change so P1 V1 = P2 V2 2 *10^5 * 80 = P2 * 25 so P2 = 2*10^5 * (80/25)
Read more.
A hypodermic syringe contains a medicine with the density of water (figure below). The barrel of the syringe has a
Top answer:
To determine the flow speed of the medicine through the needle, we can use Bernoulli's equation,
Read more.
Related Questions
Piston A has a cross section of 1200 sq.cm. While that of piston B is 950 sq.cm. with the latter higher than piston A by 1.75m.
A hydraulic lift office chair has its seat attached to a piston with an area of
11.2 cm2 . The chair is raised by exerting force
Energy is added to a piston-cylinder arrangement. The piston is withdrawn in such a way that the temperature remains constant.
Calculate the force required to move a small pistons that has an area of 2m2,if the force of a large piston is 20n with an as
in the hydraulic machine shown, you observe that when the small piston is pulled down 10cm, yhe large piston is raised 1 cm. if
A gas is confined in a 0.47m diameter cylinder by a piston, on which rests a weight. The mass of the piston and weight together
the small piston of a hydraulic press has an area of 2.0 cm and the large piston has an area of 16 cm if the small piston has a
When gasoline is burned in the cylinder of an engine, it creates a high pressure that pushes on the piston. If the pressure
A snorkeler takes a syringe filled with 16 mL of air from the surface, where the pressure is 1.0 ATM, to an unknown depth. The
The spring of the pressure gauge shown in the figure below has a force constant of 1,160 N/m, and the piston has a radius of
