A square cushion measures 65 cm by 65 cm and 10 cm thick. Using a scale of 1:20 draw views of the cushion and label them with their measurements.

Can someone help me with this? How would I go about drawing them and using the scale for measurements?

Let 20 cm be represented by 1 cm

so 20/1 = 65/x
20x = 65
x = 3.25

20/1 = 10/x
x = .5

draw you cushion as 3.25 by 3.25 by .5 cm

thank you

To draw the views of the cushion and label them with their measurements using a scale of 1:20, you will need to follow these steps:

1. Determine the number of views needed: In this case, you will need to draw the front view, top view, and side view of the cushion.

2. Calculate the dimensions for each view based on the scale: Divide the actual dimensions of the cushion by the scale (1:20) to obtain the dimensions for the drawing.

- Front View: The front view will depict the height and width of the cushion.
- Height: Divide the actual height of the cushion (10 cm) by 20. The height of the front view will be 0.5 cm (10 cm ÷ 20 = 0.5 cm).
- Width: Divide the actual width (65 cm) by 20. The width of the front view will be 3.25 cm (65 cm ÷ 20 = 3.25 cm).

- Top View: The top view will represent the length and width of the cushion.
- Length: Divide the actual length (65 cm) by 20. The length of the top view will be 3.25 cm.
- Width: Divide the actual width (65 cm) by 20. The width of the top view will also be 3.25 cm.

- Side View: The side view will show the height and length of the cushion.
- Height: Use the same height as the front view, which is 0.5 cm.
- Length: Use the same length as the top view, which is 3.25 cm.

3. Draw each view using the calculated dimensions: On a piece of paper, draw the front view, top view, and side view of the cushion using the dimensions obtained in step 2. Make sure to maintain the proportions and label each view accordingly.

- Front View: Draw a rectangle with a width of 3.25 cm and a height of 0.5 cm. Label it accordingly (e.g., "Front View") and write the measurements (e.g., "3.25 cm x 0.5 cm").

- Top View: Draw another rectangle with a length of 3.25 cm and a width of 3.25 cm. Label it as the "Top View" and include the dimensions.

- Side View: Finally, draw a vertical rectangle with a height of 0.5 cm and a length of 3.25 cm. Label it as the "Side View" and include the measurements.

Remember to adhere to the scale when drawing the views. Using a ruler or a straight edge can help you draw straight lines and maintain accuracy.

By following these steps, you will be able to draw the views of the cushion and label them with their measurements using the 1:20 scale.