Questions LLC
Login
or
Sign Up
Ask a New Question
Questions
Science
How far should you push the long end of a lever to make the short end move 17cm?
1 answer
34cm
You can
ask a new question
or
answer this question
.
Similar Questions
A force of 60 N is exerted on one end of a 1.0-m-long lever. The other end of the lever is attached to a rotating rod that is
Top answer:
.. an angle of 30 degrees relative to what direction?
Read more.
How much force must be exerted at the right end to pick up the lever and load if it pivots at the left end? The 2.00 meter long
Top answer:
To solve this problem, we need to find the force required at the right end of the lever to lift the
Read more.
How much force must be exerted at the right end to pick up the lever and load if it pivots at the left end? The 2.00 meter long
Top answer:
f * 2.00 m = (8.00 N * 0.400 m) + [(2.00 m / 2) * 1.50 N]
Read more.
A lever is placed on a fulcrum. A rock is placed on the left end of the lever and a downward (clockwise) force is applied to the
Top answer:
The measurements that would be most effective to help determine the angular momentum of the system
Read more.
A lever is placed on a fulcrum. A rock is placed on the left end of the lever and a downward (clockwise) force is applied to the
Top answer:
The correct answer is the velocity of the force, the radius of the lever, and the mass of the rock.
Read more.
Bill used a first-class lever to lift a heavy boulder that had a mass of 20 kg. He pushed down on one end of the lever with 40 N
Top answer:
To calculate the efficiency of the lever, we first need to find the work done by both the effort
Read more.
Bill used a first-class lever to lift a heavy boulder that had a mass of 20 kg. He pushed down on one end of the lever with 40 N
Top answer:
resources.finalsite.net/images/v1584024880/sydenhamlewishamschuk/agtqfqee1mgv0nnk165x/SP1andSP2Answe
Read more.
Consider a lever rod of length 7.96 m, weight 71 N and uniform density. The lever rod is pivoted on one end and is supported by
Top answer:
To find the tension of the supporting cable, we can use the principle of moments and resolve forces
Read more.
By means of a lever, a man applies 60N at one end moving the lever 1m, to move a 200N rock at the other end 0.2m. What is the
Top answer:
work output = 200 N * .2 m = 40 Joules work input = 60 N * 1 m = 60 Joules efficiency = 40/60 * 100
Read more.
A shovel performs several different functions. One of these is that it gives mechanical advantage as a lever. When does it act
Top answer:
The correct answer is A. when the shovel is in the dirt and you push down against the end of the
Read more.
Related Questions
A simple lever is used to lift a heavy load. When a 60-N force pushes one end of the lever down 1.2 m, the load rises 0.2 m.
Forces 10N and 50N are to be balance at the end of 1m long lever.Where should be the position of fulcrum?
A certain lever system is only 30% efficient. What could make it more efficient?
Make a longer lever that will require less
a uniform wooden beam 10 m long ang weighting 200 N is used to support a load of 300 N on the left end , and 500 N on the right
A shovel performs several different functions. One of these is that it gives mechanical advantage as a lever. When does it act
A pole 25m long is placed against a vertical wall such that its lower end is 7m from the foot of the wall on the same horizontal
Using a lever, a person applies 60 N of force and moves the lever 1 m. This moves a 200 N rock at the other end by 0.2 m. What
A simple lever is used to lift a heavy load. When a 60-N force pushes one end of the lever down 1.2 m, the load rises 0.2 m.
I need help with this question "A swimmer swims an entire lap, moving from the left end to the right end and back again to the
A certain lever system is only 30% efficient. What could make it more efficient? (1 point)
Responses Have more than one person
