Questions LLC
Login
or
Sign Up
Ask a New Question
Physics
Mechanics
Statics
a load P is supported
1 answer
Is that your complete question?
I don't think so.
You can
ask a new question
or
answer this question
.
Similar Questions
A laterally restrained beam 10m long that is simply supported at both ends support a dead uniformly distributed load of 25.2KN/m
Top answer:
To determine the support reactions, we can start by calculating the total load on the beam. Dead
Read more.
A 4m long circular bar was found to deflect 2cm, when it was used as a
simply supported beam and subjected to a load of 10kg at
Top answer:
To determine the crippling load that the column can carry, we need to calculate the critical
Read more.
A meter stick is supported at its center. If a load of 150 dynes is placed at the 20 cm mark, where should a 100 dynes load be
Top answer:
Torque= force • distance 150 • (0.5-0.2) = 100 • x x= 150•0.3/100=0.45 m (from the center or
Read more.
A uniform beam with a length of 7m and a weight of 100N/m is supported 3m from the ledt hand end and at the right hand end. It
Top answer:
I can't and wont make a drawing for you. One question on the wording: "supported 3m from the ledt
Read more.
the force E needed to make a machine pull a load is partly constant and partly varies as the load to be pulled itself. when the
Top answer:
"load is 20g the force needed for 30g load is 2n" Huh? Please check for typos. also do you mean g
Read more.
The safe load, L. of a wooden beam supported at both ends varies jointly as the width, w, the square of the depth, d, and
Top answer:
We can set up a proportion to solve this problem. Let L1 be the safe load of the first beam (7 in.
Read more.
The safe load, L. of a wooden beam supported at both ends varies jointly as the width, w, the square of the depth, d, and
Top answer:
We can write the equation for the safe load, L, of the wooden beam as: L = k * w * d^2 / I where k
Read more.
The safe load, L. of a wooden beam supported at both ends varies jointly as the width, w, the square of the depth, d. and
Top answer:
The formula for the safe load, L, of the wooden beam can be written as: L = k * w * d^2 / I where k
Read more.
How does a pulley help transfer mechanical energy?
a. it spreads the load out over two sides, making the load feel lighter b. it
Top answer:
c. it allows for the redirection or amplification of force, making it easier to move or lift heavy
Read more.
How does a pulley help transfer mechanical energy?
a. it spreads the load out over two sides, making the load feel lighter b. it
Top answer:
c. it changes the direction of the force being applied to the load
Read more.
Related Questions
A simple lever is used to lift a heavy load. When a 60-N force pushes one end of the lever down 1.2 m, the load rises 0.2 m.
A forklift lifts a 900-Newton load 5 meters high. It then carries this load to a horizontal distance of 20 meters. Determine the
How was President Roosevelt different from the presidents who came before him?
A. He supported trusts. B. He supported free
the load which a crane can lift up is directly proportional to the mass and inversely proportional to the height throught which
A simple lever is used to lift a heavy load. When a 60-N force pushes one end of the lever down 1.2 m, the load rises 0.2 m.
A 12,5kW single-phase inductive load operation at a power factor of 0,75 lagging is connected to a 240V supply. Each conductor
the force E needed to make a machine pull a load is partly constant and partly varies as the load to be pulled itself.when the
How was President Roosevelt, different from the presidents who came before him?
a. He supported trusts. b. He supported free
The farmer sells a 41.9915-tonne load to a buyer who takes a
single scoop of tomatoes from a random spot in the load. If the
A crane lifts a 200kg load at a steady velocity.It takes 12s to raise the load through 60m.
i) What is the power needed to lift
