1. The type of machine that uses a needle that goes from side to side is a/an

A. chain-stitch machine.
B. straight-stitch machine.
C. offset machine.
D. zigzag machine.

2. Zigzag machines are divided into two categories:
A. manual and automatic.
B. overlock and serger.
C. fully atuomatic and semiautomatic.
D. variable speed manual.

3. A foot that allows the needle to sew from side to side is a
A. swivel.
B. zigzag.
C. binder.
D. blind hemmer.

4. A chair that's at the correct height for your sewing table is an example of
A. ergonomics.
B. economics.
C. environment.
D. ideal height.

5. Another name for a thread guide is a/an
A. spindle.
B. escapement.
C. tension guide.
D. spool.

6. A tension assembly places _______ on the thread.
A. pull
B. tug
C. resistance
D. pressure

7. The part of the machine that draws thread up from the bobbin is called a/an
A. take-up lever.
B. needle.
C. upper tension assembly.
D. shuttle.

8. The recommended height for a sewing table is
A. 36 in.
B. 48 in.
C. 27 in.
D. 32 in.

9. The machine should not be oiled until the
A. parts clatter.
B. recommended time between oilings is up.
C. oil indicator light comes on.
D. uptake is at its highest point.

10. The bobbin, bobbin case, and the race hook are located in the
A. lower tension assembly.
B. escapement.
C. swing arm.
D. shuttle.

11. The _______ places the thread loop over the bobbin case.
A. needle
B. rotary mechanism
C. spindle hook
D. race hook

12. The _______ move the fabric forward in the machine.
A. hem guides
B. feed dogs
C. pressure plates
D. zipper feet

13. To adjust the lower tension on an oscillating-hook type machine, you would turn a screw on the
A. bobbin case.
B. needle holder.
C. upper tension assembly.
D. race hook.

14. The area most likely to become impacted with lint is around the
A. bobbin.
B. upper tension assembly.
C. feed dogs.
D. needle.

15. Sharp objects such as a screwdriver or nail should never be used for removing lint because they'll
A. break off in the machine.
B. create burrs.
C. bend delicate parts.
D. shock you.

16. To remove burrs, use
A. a file.
B. sandpaper.
C. a grinder.
D. crocus cloth.

17. The race hook should be oiled every
A. week.
B. year.
C. 6-8 hours of running time.
D. day.

18. A unique characteristic of machine oil is that it
A. evaporates.
B. doesn't stain.
C. is odorless.
D. is colorless.

19. Skipping stitches may be the result of using
A. a bobbin tension that is too tight.
B. thread that is too coarse for the needle.
C. a needle that is too fine for the thread.
D. thread that is of poor quality.

20. The first lock-stitch sewing machine was invented by
A. Isaac Singer.
B. Elias Howe.
C. A. B. Wilson.
D. Ben Franklin.

have the answer jast wanna see if auther people have a some as me.thxxs

We'll be happy to check YOUR answers.

2) is C .

ARE THESE ANSWERS CORRECT?

oh wow these are all wron you stupid

The type of machine that uses a needle that goes from side to side is a/an

they are all wrong

Question Number Your Answer Answer Reference


1. D Correct
2. C Correct
3. B Correct
4. A Correct
5. B Correct
6. C Correct
7. A Correct
8. C Correct
9. D Correct
10. D Correct
11. D Correct
12. B Correct
13. A Correct
14. C Correct
15. B Correct
16. D Correct
17. C Correct
18. A Correct
19. C Correct
20. B Correct

i just took this test. the best way to make sure these are the write answers is to look up the answers in the book using referencing.

Thank you

1. To find the answer to this question, you need to identify the type of machine that uses a needle that goes from side to side. The options given are chain-stitch machine, straight-stitch machine, offset machine, and zigzag machine. By considering the description, the correct answer is D. zigzag machine.

2. To determine the categories into which zigzag machines are divided, you can read the options provided. They are manual and automatic, overlock and serger, fully automatic and semiautomatic, and variable speed manual. Based on your knowledge or additional research, you will find that the correct answer is B. overlock and serger.

3. In order to identify the foot that allows the needle to sew from side to side, consider the options given: swivel, zigzag, binder, and blind hemmer. By analyzing the options, the correct answer is B. zigzag.

4. To understand the term that describes a chair at the correct height for your sewing table, you need to consider the options: ergonomics, economics, environment, and ideal height. By analyzing the options, the correct answer is A. ergonomics.

5. To find another name for a thread guide, review the options provided: spindle, escapement, tension guide, and spool. Based on your knowledge or additional research, you will find that the correct answer is C. tension guide.

6. To determine what a tension assembly does to the thread, consider the options provided: pull, tug, resistance, and pressure. By analyzing the options, the correct answer is C. resistance.

7. In order to identify the part of the machine that draws thread up from the bobbin, review the options: take-up lever, needle, upper tension assembly, and shuttle. By considering the description, the correct answer is A. take-up lever.

8. To find the recommended height for a sewing table, review the options: 36 in., 48 in., 27 in., and 32 in. By analyzing the options, the correct answer is C. 27 in.

9. To determine when the machine should be oiled, consider the options provided: parts clatter, recommended time between oilings is up, oil indicator light comes on, and uptake is at its highest point. Based on your knowledge or additional research, you will find that the correct answer is B. recommended time between oilings is up.

10. In order to identify the location of the bobbin, bobbin case, and the race hook, review the options: lower tension assembly, escapement, swing arm, and shuttle. By considering the description, the correct answer is D. shuttle.

11. To find the component that places the thread loop over the bobbin case, consider the options provided: needle, rotary mechanism, spindle hook, and race hook. By analyzing the options, the correct answer is C. spindle hook.

12. To determine the components that move the fabric forward in the machine, review the options: hem guides, feed dogs, pressure plates, and zipper feet. By considering the description, the correct answer is B. feed dogs.

13. In order to adjust the lower tension on an oscillating-hook type machine, you would turn a screw on the options: bobbin case, needle holder, upper tension assembly, and race hook. By analyzing the options, the correct answer is A. bobbin case.

14. To find the area most likely to become impacted with lint, review the options provided: bobbin, upper tension assembly, feed dogs, and needle. By considering the description, the correct answer is B. upper tension assembly.

15. To understand why sharp objects should never be used for removing lint, consider the options: break off in the machine, create burrs, bend delicate parts, and shock you. By analyzing the options, the correct answer is B. create burrs.

16. In order to remove burrs, you can use the options provided: a file, sandpaper, a grinder, and crocus cloth. Based on your knowledge or additional research, you will find that the correct answer is D. crocus cloth.

17. To determine how often the race hook should be oiled, review the options: week, year, 6-8 hours of running time, and day. By considering the options, the correct answer is C. 6-8 hours of running time.

18. To find a unique characteristic of machine oil, consider the options provided: evaporates, doesn't stain, is odorless, and is colorless. Based on your knowledge or additional research, you will find that the correct answer is D. is colorless.

19. In order to identify the possible cause of skipping stitches, review the options: a bobbin tension that is too tight, thread that is too coarse for the needle, a needle that is too fine for the thread, and thread that is of poor quality. By analyzing the options, the correct answer is C. a needle that is too fine for the thread.

20. To determine who invented the first lock-stitch sewing machine, consider the options provided: Isaac Singer, Elias Howe, A. B. Wilson, and Ben Franklin. By analyzing the options, the correct answer is B. Elias Howe.

That's it!

1.d

2.a
3.b
4.d
5.a
6.b
7.a
8.a
9.c
10.b
11.a
12.d
13.b
14.a
15.b
16.d
17.a
18.c
19.d
20.a